Read Panasonic TH-98SQ1W (serv.man2) Service Manual online
INF-16
SECTION 1 SERVICE INFORMATION
<98/86SQ1>
4.3. System log data acquisition method
* This model has two System log data acquisition method shown below.
4.3.1. System log data acquisition method (by using MENU and USB memory)
4.3.1.1. Tools and preparation
1. USB memory : It stores a System log file. (FAT16 format or FAT32 format)
4.3.1.2. Acquiring procedure
1. Turn on the Display and Insert the USB Memory to the USB interface.
2. Press the [SETUP] button to display the setup menu on the screen. Select [Options] menu with [pq] buttons and press the
[ENTER] button.
The below window will appear. (Output log data is gray out when USB Memory is not inserted.)
3. Select [Output log data] menu with [pq] buttons and press the [ENTER] button.
The below window will appear.
4. Select [Yes] with [tu] buttons and press the [ENTER] button to start outputting.
The below window will appear.
5. The message below will appear when the outputting has been finished correctly.
6. Remove the USB memory from the slot.
Are you sure you want to output log data to USB memory ?
YES
NO
DO NOT unplug your Display!
Output log data in progress, please wait.
Output log data in progress, please wait.
Output log data finshed.
No.
Metod
Tool
FP log tool
Remarks
1
MENU of the SQ1
USB memory
FP_Log_Decode_tool.exe
2
Multi Monitorring &
Control Software
PC + LAN
FP_Log_Decode_tool.exe
Please use the "Multi Monitorring &
Control Softwaresoftware" version 2.2
or later.
Options
Display information
Software licenses
Cloning password
USB data cloning
LAN data cloning
Output log data
Shipping
Click on the first or last page to see other TH-98SQ1W (serv.man2) service manuals if exist.