Read Panasonic TH-98SQ1W (serv.man2) Service Manual online
INF-11
SECTION 1 SERVICE INFORMATION
<98/86SQ1>
3. 4. Network connection check mode (NW Mode)
1. Display the CAT mode (Refer to 3.1.).
2. The CAT mode menu appears on the screen. Select the [NW Mode] menu with [pq] buttons and press the [ENTER] button
to enter the NW mode.
3. Press the [ENTER] button to start the network connection check. The check result will be displayed in a few seconds.
To exit the NW mode
Press the [RETURN] button to return to the CAT mode menu
-8
dB
-17
dB
Displays the result of [TEST]
• OK
: There is a response of PING
• BSY
: On test executing
• G_NG
: No response of PING
• L_NG
: A LINK state is not established
Displays the signal quality of 4-route (A,B,C,D) at
DIGITAL LINK operation
• Min
: Minimum signal level
• Max
: Maximum signal level
Software version of Valens IC(RX)
Cable length (It is displayed only
when the LINK status is DIGITAL LINK.)
Model name of connected DIGITAL LINK apparatus
Displays the connection status
• No link
: No connection
• DIGITAL LINK : Operates as DIGITAL LINK
• Ethernet
: Operate as Ethernet
Displays HDMI ON/OFF, HDCP status
• No HDMI : Can not be recognized as a HDMI signal
• HDMI on : Not HDCP HDMI signal
• HDCP on : HDCP HDMI signal
CAT Panel sys.8.2
IIC Mode
CD Mode
NW Mode
SD Mode
MS Mode
ID Mode
Click on the first or last page to see other TH-98SQ1W (serv.man2) service manuals if exist.