Read Panasonic TH-86SQ1W (serv.man2) Service Manual online
ADJ-7
SECTION 3 ADJUSTMENTS
<98/86SQ1>
1.2.2.3. Confirmation of version
1. Display the CAT mode (Refer to Section 1 - 3.1.)
2. The CAT mode menu appears on the screen. Select the [CD Mode] menu with [pq] buttons and press the [MUTE] button
for more than 3 seconds to enter the CD mode.
1.2.2.4. Confirmation of version (User mode)
1. Press [SETUP] button on remote controller.
2. The Setup menu appears on the screen. Select the [Language] menu with [pq] buttons and press the [Enter] button.
3. The Options menu appears on the screen. Select the [Display software information] menu with [pq] buttons.
[Note] Display items may vary depending on the model.
SUB CPU firmware version
5. After finishing the updating, the window below appear and click [OK] to close the software.
6. Wen some function board is attached to the [SLOT: Expansion slot]
Please power off the board first as the function board power is on.
Please power off the board first as the function board power is on.
(Note: About how to power off the function board, please refer to the
instruction manual of the board.)
7. Turn the display off and leave for more than 1 minute and then turn on again.
Enter the service mode [CD Mode] and confirm that the version has been updated.
Click on the first or last page to see other TH-86SQ1W (serv.man2) service manuals if exist.