Read Panasonic TH-80BF1U / TH-80BF1W / TH-80BF1E Service Manual online
DIS-24
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
Caution when attaching P PCB Fixing Metal
• The Metal must not overlap the boss of LCD Panel.
• Tightened in order of (1-2), the other screws are free.
11. Remove the screws and then remove the VESA Metal Up (with VESA Metal).
36
TH-80LFB70U/TH-80LFB70W
Caution when attaching P PCB Fixing Metal
• The Metal must not overlap the boss of LCD Panel.
• Tightened in order of (1-2), the other screws are free.
• Tightened in order of (1-2), the other screws are free.
11. Remove the screws and then remove the VESA Metal Up
(with VESA Metal).
Attention when replacing LCD Panel
(1) Attach a VESA Metal Up (with VESA Metal) to the
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
(3) Check that the FFC (from V1-Board) and the
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
36
TH-80LFB70U/TH-80LFB70W
Caution when attaching P PCB Fixing Metal
• The Metal must not overlap the boss of LCD Panel.
• Tightened in order of (1-2), the other screws are free.
• Tightened in order of (1-2), the other screws are free.
11. Remove the screws and then remove the VESA Metal Up
(with VESA Metal).
Attention when replacing LCD Panel
(1) Attach a VESA Metal Up (with VESA Metal) to the
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
(3) Check that the FFC (from V1-Board) and the
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
36
TH-80LFB70U/TH-80LFB70W
Caution when attaching P PCB Fixing Metal
• The Metal must not overlap the boss of LCD Panel.
• Tightened in order of (1-2), the other screws are free.
• Tightened in order of (1-2), the other screws are free.
11. Remove the screws and then remove the VESA Metal Up
(with VESA Metal).
Attention when replacing LCD Panel
(1) Attach a VESA Metal Up (with VESA Metal) to the
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
LCD Panel for repair.
(2) As shown in the following figure, please attach
beforehand the Clamper for paste included with
LCD Panel for repair.
(3) Check that the FFC (from V1-Board) and the
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
lead wire (from Touch Module) are taken
out to the outside of the Cabinet.
(4) Two person hold the narrow-side of LCD Panel
and raise it, and move to the Cabinet. Since the
worker who carries becomes a situation where the
circumference cannot be seen, in order that he
may guide safely, one person needs to do the
assistance under movement, and the directions
of a place to take down.
Click on the first or last page to see other TH-80BF1U / TH-80BF1W / TH-80BF1E service manuals if exist.