TH-80BF1U, TH-80BF1W, TH-80BF1E - Panasonic TV Service Manual (repair manual). Page 35

DIS-9

• Please stick PET+AL-tape and Aluminum tape on the position of the following figure after attaching a shieid to A-Board.

26

TH-80LFB70U/TH-80LFB70W

• The shield is not attached to A-Board for repair.

Please be sure to remove a shield from A-Board and reuse
it.

• When attaching a shield to A-Board, please check whether it

is correctly inserted in all the shield clips.
* When the shield is not correctly inserted in all the shield
clips, fitting of Terminal Bracket Assy and the hexagon screw
of a DVI terminal worsens, and it may be unable to attach a
hexagon screw.

• When replacing the A-Board, please be sure to restick a

Heat Sheet on the original position.

• Please stick PET+AL-tape and Aluminum tape on the posi-

tion of the following figure after attaching a shield to A-
Board.

27

TH-80LFB70U/TH-80LFB70W

1. Remove the screws and then remove the Terminal

Bracket Assy.

• When replacing Terminal Bracket Assy, please also

replace the gaskets at the same time.

1. Disconnect the connectors and remove the screws and

then remove the HX-Board.