Read Panasonic TH-80BF1U / TH-80BF1W / TH-80BF1E Service Manual online
DIS-7
SECTION 2 DISASSEMBLY PROCEDURES
<80BF1>
2.8. Replacement of A-Module
1. Remove the screws fixing the Terminal Bracket Assy and A-Module and then remove the Terminal Bracket Assy.
2. Disconnect the connectors and remove the screws and then remove the A-Module (with shield and Fan).
3. Remove the shield (with Fan) from A-Module.
25
TH-80LFB70U/TH-80LFB70W
About attachment of an enclosed parts
• Aluminum tape included with DS-Board for repair. Be sure to
stick the aluminum tape when replacing DS-Board.
<Sticking specification of the aluminum tape>
7.8. Replacement of A-Board
1. Remove the screws fixing the Terminal Bracket Assy and
A-Board and then remove the Terminal Bracket Assy.
2. Disconnect the connectors and remove the screws and
then remove the A-Board (with shield and Fan).
3. Remove the shield (with Fan) from A-Board.
25
TH-80LFB70U/TH-80LFB70W
About attachment of an enclosed parts
• Aluminum tape included with DS-Board for repair. Be sure to
stick the aluminum tape when replacing DS-Board.
<Sticking specification of the aluminum tape>
7.8. Replacement of A-Board
1. Remove the screws fixing the Terminal Bracket Assy and
A-Board and then remove the Terminal Bracket Assy.
2. Disconnect the connectors and remove the screws and
then remove the A-Board (with shield and Fan).
3. Remove the shield (with Fan) from A-Board.
25
TH-80LFB70U/TH-80LFB70W
About attachment of an enclosed parts
• Aluminum tape included with DS-Board for repair. Be sure to
stick the aluminum tape when replacing DS-Board.
<Sticking specification of the aluminum tape>
7.8. Replacement of A-Board
1. Remove the screws fixing the Terminal Bracket Assy and
A-Board and then remove the Terminal Bracket Assy.
2. Disconnect the connectors and remove the screws and
then remove the A-Board (with shield and Fan).
3. Remove the shield (with Fan) from A-Board.
25
TH-80LFB70U/TH-80LFB70W
About attachment of an enclosed parts
• Aluminum tape included with DS-Board for repair. Be sure to
stick the aluminum tape when replacing DS-Board.
<Sticking specification of the aluminum tape>
7.8. Replacement of A-Board
1. Remove the screws fixing the Terminal Bracket Assy and
A-Board and then remove the Terminal Bracket Assy.
2. Disconnect the connectors and remove the screws and
then remove the A-Board (with shield and Fan).
3. Remove the shield (with Fan) from A-Board.
A-Module
Click on the first or last page to see other TH-80BF1U / TH-80BF1W / TH-80BF1E service manuals if exist.