Read Panasonic CT-34WX50 Service Manual online
- 9 -
Service Hints
Before servicing
(1) Remove the screws fixing the rear cover (11 pcs.: Refer
to Fig. 1).
(2) Remove the rear cover by raising the chassis a little
and pulling to the rear
. (Refer to Fig. 2.)
*
At this time, disconnect the coupler P11, the ring
clamper, etc. as required to facilitate the pulling out of the
chassis.
clamper, etc. as required to facilitate the pulling out of the
chassis.
*
After completion of servicing, any disconnected couplers
and clampers must be restored to their original condition.
and clampers must be restored to their original condition.
In regard to inspection of A-Board
and D-Board
and D-Board
The A-Board and D-Board can be inspected from the pat-
tern side when the chassis is pulled out and tilted up.
(Refer to Fig. 3.)
tern side when the chassis is pulled out and tilted up.
(Refer to Fig. 3.)
*
At this time, disconnect the coupler P11, the clamp, etc.
as required to facilitate tilting of the chassis.
as required to facilitate tilting of the chassis.
*
When tilting the chassis, pay sufficient attention to the L-
Board at the neck of the picture tube
Board at the neck of the picture tube
Fig.1 Positions of the screws fixing the rear cover
Fig.2 How to tilt the chassis
Fig.3 Inspection of the A-Board and D-Board
1
2
10
5
9
11
6
7
1
2
3
4
8
1
2
Insert a cloth or similar so that
the Board will not have contact.
the Board will not have contact.
A-Board
D-Board
Click on the first or last page to see other CT-34WX50 service manuals if exist.