KX-TS710EXB, KX-TS710EXS - Panasonic Telephone Service Manual (repair manual). Page 14

14

TS710 is entered to Test Mode.
Clock frequency is output from BCLK. 
Key input information is displayed in [Messages From TS710] window. 
Procedure:

Input 'ts' command by using “USB Debug Tool”. Refer to USB Debug Tool setting (P.13).

: Enter key

TS710 is reset to the initial settings by this operation except value of BCLK.
When the status indicator is flashing, this operation solve the problem that is error of data.
Procedure:

Input 'ia' command by using “USB Debug Tool”. Refer to USB Debug Tool setting (P.13).

: Enter key

TS710 is entered to HS Loopback Mode.
Input signal from MIC is output by the receiver. 
Procedure:

Input 'a1' command by using “USB Debug Tool”. Refer to USB Debug Tool setting (P.13).

: Enter key