KX-TS710EXB, KX-TS710EXS - Panasonic Telephone Service Manual (repair manual). Page 13

13

PC setting using Windows XP.
Preparation:

Prepare PC, the unit and the test mode application.
Prepare USB Debug Tool CD-ROM : PNZZTS710M
Installation:

Put "TS710" folder to any folder for instance Desktop, My Document.
Note:

If this error message was displayed:  “This application has failed to start because MFC71.DLL was not found.”, put a
“MFC71.DLL” to c:/windows/system32.
Procedure:

<How to enter TEST mode>

 Connect the USB cable to TS710 and PC.

 Start Windows and “HID_TS710.exe”, and exit all other applications.
 Check the [STATUS bar] is displayed “Connected”.
 Enter “ts” into [Free command] window.
 Click to [Send Command].
 When [Messages From TS710] window displayed “TEST”, TS710 is into TEST mode.(*1)

(*1) If [Messages From TS710] window displayed “EEPROM ERROR”, it indicate that the EEPROM device is abnormal.  But,
TS710 is into TEST mode. Therefore TS710 can execute other command for instance “ia”, “e”, and so on.
There is a possibility that “EEPROM ERROR” is displayed when DSP (IC201) or EEPROM (IC261) is replaced. 

<How to execute command>

 Enter a new command into [Free command] window.

 Click to [Send Command]. 
 [Messages From TS710] window display the result of executed command.