Read Panasonic KX-TG2560B / KX-TG2560S Service Manual online
30
KX-TG2560B/KX-TG2560S
Once aligned, please perform the following procedure.
1.
Disconnect all equipment and solder connections. Use solder wick to clean up any solder you added.
2.
Install the keypad membrane on top of the HANDSET keys.
3.
Install the HANDSET P.C.Board.
4.
Solder speaker wires back onto the P.C.Board observing correct polarity.
5.
If you will align Item (C) RX Input in BASE UNIT, then solder a short wire across the MIC leads. Remember to unsolder this
wire after you completed the BASE UNIT alignment.
6.
Insert antenna into the case.
7.
Install antenna and P.C.Board mounting screws and solder and connector antenna connection.
8.
Install case back and bottom mounting screws.
9.
DO NOT INSTALL THE BATTERY AT THIS TIME!!!!!!
CN
Click on the first or last page to see other KX-TG2560B / KX-TG2560S service manuals if exist.