Read Panasonic KX-TG1611UAF / KX-TG1611UAH / KX-TG1611UAR / KX-TG1611UAW / KX-TG1612UAH / KX-TGA161RUF / KX-TGA161RUH / KX-TGA161RUR / KX-TGA161RUW (serv.man2) Service Manual Supplement online
17
(N)* RSSI Level Confirmation -
Follow steps 1 to 4 of (I).
4. Set DECT tester power to -70dBm.
5. Execute the command “readrssi”.
6. Confirm: 9 < returned value < 13 (hex) (0E ± 5 (hex))
5. Execute the command “readrssi”.
6. Confirm: 9 < returned value < 13 (hex) (0E ± 5 (hex))
C814, C812,
IC103, C813,
C807, C819,
C826, D803,
C817, C149,
RA801, C823,
C803, C825,
C110, C802,
C804, C821,
C820, C815
IC103, C813,
C807, C819,
C826, D803,
C817, C149,
RA801, C823,
C803, C825,
C110, C802,
C804, C821,
C820, C815
(O) Audio Check and
Confirmation
-
1. Link with BASE which is connected to Line Simulator.
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm (600
2. Set line voltage to 48V and line current to 50mA.
3. Input -45dBm (600
)/1KHz to MIC of Handset. Measure the Level at Line I/F
and distortion level.
4. Confirm that the level is -5.5 ± 3dBm and that the distortion level is < 5% at TEL
Line (600
Load).
5. Input -20dBm (600
)/1KHz to Line I/F. Measure the level at Receiver of
Handset and distortion level (*Receive volume set to third position from
minimum).
minimum).
6. Confirm that the level is -23.5 ± 3dBm and that the distortion level is < 5% at
Receiver (150
Load).
Items
Adjustment
Point
Procedure
Check or
Replace Parts
Click on the first or last page to see other KX-TG1611UAF / KX-TG1611UAH / KX-TG1611UAR / KX-TG1611UAW / KX-TG1612UAH / KX-TGA161RUF / KX-TGA161RUH / KX-TGA161RUR / KX-TGA161RUW (serv.man2) service manuals if exist.