Read Panasonic KX-TCD951EB / KX-TCD955EC Service Manual online
KX-TCD951EB/KX-TCD955EC
12
SETTING THE RECEIVER VOLUME
TO SELECT THE RECEIVER VOLUME
3 levels (HIGH, MEDIUM, LOW) are available. The factory preset is MEDIUM.
While talking, press
or to select the desired level.
•
The display shows the volume level.
Ex. LOW is selected.
(KX-TCD951EB)
(KX-TCD955EC)
•
After a few seconds, the display will return to the length of the call.
O R
In the stand-by mode, proceed as follows.
ANSWERING CALLS
Make sure that the power is ON, otherwise the handset will not ring.
(KX-TCD951EB)
(KX-TCD955EC)
1
If the handset is off the base unit, press
.
•
You can also answer a call by pressing any dialing
button
0
to
9
,
or
(-Any Key Talk).
O R
If on the base unit, just lift up.
•
The handset and base unit will not ring if both ringer
volumes are set to OFF.
If you subscribe to a Caller ID service, the calling party
information will be displayed after the first ring. In order to
view the Caller ID information, please wait until the second
ring to answer a call.
1
Press
.
•
You can also answer a call by pressing any dialing
button
0
to
9
,
or
(—Any Key Talk).
2
To hang up, press
or place the handset on the
base unit.
•
The handset and base unit will not ring if both ringer
volumes are set to OFF.
1 Press
PROG
.
2 Press or
until "
" is displayed, then press
OK
.
• The current level is displayed.
Ex. LOW is selected.
3 Press or
to select the desired level.
4 Press
PROG
.
Receiver Volume
LOW HIGH
1 Press
F
.
2 Press
or
until the arrow points to "
Program
", then
press OK .
3 Press
or
until the arrow points to "
Receiver
Volume
", then press OK .
4 Press or
to select the desired level.
5 Press OK .
•
The display will return to "
Receiver Volume
". To return
to the stand-by mode, press
C
or wait for 60 seconds.
Click on the first or last page to see other KX-TCD951EB / KX-TCD955EC service manuals if exist.