Read Panasonic KX-TCD435RU / KX-TCD437RU / KX-A143RU Service Manual online
Address
Default
Name
Country
Setting
Type
Description
09F2
00
HsRegInfo.EmcFlags
x
D
Handset registration info - EMC flags
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
09F3
21
RingMode
x
D
Ring mode. Modes used in KAMMA4 are 20h and 21h.
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
27.3.3.
Flash Time setting
Address
Default
Name
Country
Setting
Type
Description
0F0B
08
CalibBreakTime[0]
0A
D
Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 80 ms
Unit: 10 ms, defaultst to 80 ms
0F0C
14
CalibBreakTime[1]
46
D
Calibrated loop-break time for long break
Unit: 10 ms, defaultst to 200 ms
Unit: 10 ms, defaultst to 200 ms
0F0D
46
CalibBreakTime[2]
14
D
Calibrated loop-break time for extra-long break
Unit: 10 ms, defaultst to 700 ms
Unit: 10 ms, defaultst to 700 ms
27.3.4.
Clip (Caller ID) configuration
Address
Default
Name
Country
Setting
Type
Description
0F1C
70
Detect
74
D
CLIP detect configuration
Bit
0-2: Mode: 0: Learn mode, 1: DTMF only, 2: FSK
only, 3: Generic mode, 4: Russian CLIP only
3: Unused4
4: Onhook: 1=enable 0=disable
5: Offhookk: 1=enable 0=disable
6: Msgwaiting: 1=enable 0=disable
7: NoDtas: 1=enable 0=disable
Bit
0-2: Mode: 0: Learn mode, 1: DTMF only, 2: FSK
only, 3: Generic mode, 4: Russian CLIP only
3: Unused4
4: Onhook: 1=enable 0=disable
5: Offhookk: 1=enable 0=disable
6: Msgwaiting: 1=enable 0=disable
7: NoDtas: 1=enable 0=disable
0F37..38
3D 00
Parse.Configuration
x
D
Clip parse set configuration
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: ProtocolPriority:
If 2 mutually exclusive parameters occurs, the 1st in
the protocol message has priority.
1=enable 0=disable
9: UseCallType:
Verify the Call Type parameter, if available, when
receiving Call Back CLIP at busy subscriber.
1=enable 0=disable
10: AddTop0IfNo0
Automatic addition of 0 if top of Caller ID is not 0.
1=enable 0=disable
11: DtmfDigitsOnly
Parse DTMF clip without start and/or stop code.
1=enable 0=disable
12..15: Reserved12..Reserved15
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: ProtocolPriority:
If 2 mutually exclusive parameters occurs, the 1st in
the protocol message has priority.
1=enable 0=disable
9: UseCallType:
Verify the Call Type parameter, if available, when
receiving Call Back CLIP at busy subscriber.
1=enable 0=disable
10: AddTop0IfNo0
Automatic addition of 0 if top of Caller ID is not 0.
1=enable 0=disable
11: DtmfDigitsOnly
Parse DTMF clip without start and/or stop code.
1=enable 0=disable
12..15: Reserved12..Reserved15
27.3.5.
BsUiTask settings
Address
Default
Name
Country
Setting
Type
Description
0F4B
03
Config1
13
D
BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled, enabled
1: ClipDetectionSettingEnabled, disabled
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled, disabled
6: SMSPabxSupportSettingEnabled, disabled
7: ARSDisablePossible, disabled
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled, enabled
1: ClipDetectionSettingEnabled, disabled
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disabled
5: SmscSendNumberSettingEnabled, disabled
6: SMSPabxSupportSettingEnabled, disabled
7: ARSDisablePossible, disabled
69
KX-TCD435RU / KX-TCD437R U / KX-A143RU
Click on the first or last page to see other KX-TCD435RU / KX-TCD437RU / KX-A143RU service manuals if exist.