Read Panasonic KX-PRW110UAW / KX-PRWA10RUW Service Manual online
23
KX-PRW110UAW/KX-PRWA10RUW
8.2.
EEPROM LAYOUT (Handset)
8.2.1.
Scope
The purpose of this section is to describe the layout of the EEPROM (IC3) for the KX-PRWA10 Handset.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of the
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of the
handset, some are set by the user when configuring the handset, and some during normal use of the phone.
8.2.2.
Introduction
The handset uses a 64k bit serial EEPROM (IC3) for storing volatile parameters. All parameters are set up before the handset
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
This document lists all default parameters with a short description.
the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmed before the
actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.
This document lists all default parameters with a short description.
8.2.3.
EEPROM contents
MMI Setting:
MMI1 Setting:
Initial Type
Description
F
The data initialized by only F command
0
The data initialized by F and 0 command
1
The data initialized by F, 0 and 1 command
2
The data initialized by F, 0, 1 and 2 command
3
The data initialized by all command (F, 0, 1, 2, 3)
Country Setting
Description
x
Default - no specific country setting, so revert to default value.
Address Initial
Type
Name
Description
Default value
Country
Setting
04 1A
3
EEP_Language
Selected Language for LCD
GERMAN:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13 RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
UKRINIAN:20 SPANISHMEX:21 SLOVENIAN:22
ESTNIAN:23 LITHUANIAN:24
LATVIAN:25 ROMANIAN:26 BULGARIAN:27
MACEDONIAN:29
ALBANIAN:30 PORTUGUESEMEX:31
ENGLISH(USA):32 HEBREW:33
ARABIC:34 PERSIA:35 HANTAI:36 HANTAI(HK):37
RUSSIAN(BX):38
BELARUS:39 KAZAKHSTAN:40 UZBEKISTAN:41
TAJIKISTAN:42
TURKMENISTAN:43 AZERBAIJAN:44 ARMENIA:45
MOLDOV:46
CANADAENGLISH:48 USSPANISH:49 USFRENCH:50
PORTUGUESE:51 ENGLISH(AZ):52
GERMAN:0 ENGLISH:1 SPANISH:2 NORWEGIAN:3
FRENCH:4
ITALIAN:5 DENISH:6 DUTCH:7 SWEDISH:8
FINNISH:9
GREEK:10 TURKISH:11 HUNGARIAN:12
PORTUGUESE:13 RUSSIAN:14
POLISH:15 SLOVAKIAN:16 CZECH:17 CROATIAN:18
CATALAN:19
UKRINIAN:20 SPANISHMEX:21 SLOVENIAN:22
ESTNIAN:23 LITHUANIAN:24
LATVIAN:25 ROMANIAN:26 BULGARIAN:27
MACEDONIAN:29
ALBANIAN:30 PORTUGUESEMEX:31
ENGLISH(USA):32 HEBREW:33
ARABIC:34 PERSIA:35 HANTAI:36 HANTAI(HK):37
RUSSIAN(BX):38
BELARUS:39 KAZAKHSTAN:40 UZBEKISTAN:41
TAJIKISTAN:42
TURKMENISTAN:43 AZERBAIJAN:44 ARMENIA:45
MOLDOV:46
CANADAENGLISH:48 USSPANISH:49 USFRENCH:50
PORTUGUESE:51 ENGLISH(AZ):52
0x01
0x14
Address Initial
Type
Name
Description
Default value
Country
Setting
00 63
F
EEP_LcdContrastOffset
Set the VCOM offset voltage
0xAC
x
Click on the first or last page to see other KX-PRW110UAW / KX-PRWA10RUW service manuals if exist.