Read Panasonic KX-PRW110UAW / KX-PRWA10RUW Service Manual online
21
KX-PRW110UAW/KX-PRWA10RUW
8.1.2.
Handset
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
8). Press
(off) to return to standby mode.
After that, remove and reinsert the batteries.
Press the Power button for about 1 second if
the power is not turned on.
Press the Power button for about 1 second if
the power is not turned on.
H/S key operation
H/S LCD
3). Enter "7", "2", "6", "2", "7", "6", "6", "4".
Note: 7262 7664 = PANA SONI
(see letters printed on dial keys)
5). Enter " ", " ", " ", " " (Address). (*1)
6). Enter " ", " " (New Data). (*1)
7). Press , a long confirmation beep
will be heard.
{
OK
}
Base Unit PIN
OK
Back
Service Mode
Gets S/W Ver.
d
d
Read EEP
Write EEP
OK
C
Set Addr.:
OK
Set Addr.:
Back
Default Data
OK
C
Set Addr.:
New Data
Menu
1). Press
{
}
4). Select "Write EEP" using or
then press
then press
{
OK
}
.
{^}
{V}
2). Select "Initial Setup" using , , , or
then press
then press
{
OK
}
.
{^}
{V}
{>}
{>
}
.
Soft keys
Navigator key/
?
(Volume) key
Dial keypad
{R/ECO}
R: Recall/Flash
ECO: Eco mode shortcut key
R: Recall/Flash
ECO: Eco mode shortcut key
{ic} (Off/Power)
Initial Setup
OK
Intercom
C C
Caller List
C C
OK
Intercom
Click on the first or last page to see other KX-PRW110UAW / KX-PRWA10RUW service manuals if exist.