KX-NT511ARUW, KX-NT511ARUB - Panasonic Telephone Service Manual (repair manual). Page 13

13

• When connecting a headset, the following headsets can be used with this unit.

(Not all operations with the headsets can be guaranteed.)
- Wired headsets
  Panasonic KX-TCA400 or KX-TCA430
For up-to-date information about headsets that have been tested with this unit, please contact your dealer.

• Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack when bent.

To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.

• Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm in diameter or less.

• If PoE is available, an AC adaptor is not needed.

*1

• KX-NT511PRU complies with the PoE Class 2 standard.
• KX-NT551/KX-NT553/KX-NT556 complies with the PoE Class 3 standard.

*1

  KX-NT511PRU/KX-NT551/KX-NT553/KX-NT556 only

• The PC port does not support PoE for connected devices.

• Ensure that the Ethernet cables and the AC adapter cord are clamped to prevent damage to the connectors.