Read Panasonic AW-E800E Service Manual online
– 9 –
Note : The Cursors are not displayed when the vertical
and horizontal coordinate have been (0,0)
because of out of effective picture field.
8
Operate the Cursor position by the MENU (
M
) Switch and
the ITEM/AWC (
<
) Switch.
8
The Scratch is eliminated when the cursors intersection
coincides with the scratch position.
8
For the next scratch, move the Character Blink to be
compensated Scratch Number.
8
Operate the cursor position by the MENU (
M
) and the
ITEM/AWC (
<
) Switch.
8
The scratch is eliminated when coincide the cursors
intersection and scratch position.
8
The maximum Compensated Scratch Numbers are eight.
8
After completion of compensation, move the character
blink to "End" position and press the YES/ABC (+) Switch.
(12). Manual Blemish Concealment and Correction
Test Point:
Video Output Connector
Rear Panel
Adjust:
MENU (
M
) Switch
Rear Panel
ITEM/AWC (
<
) Switch
Rear Panel
8
Turn the power ON while pressing the ITEM/AWC (
<
)
Switch and NO/BAR (–) Switch on the Rear Panel of the
AW-E800.
8
The Menu will be displayed as shown in Fig. 4-16 after
execute the Scratch Compensation Mode.
Fig. 4-16
8
Select the H Scratch address or V Scratch address by the
YES/ABC (+) Switch or NO/BAR (–) Switch.
Press the NO/BAR (–) Switch the address has been
changed sequentially as shown in Fig. 4-17 (press the
YES/ABC (+) Switch changing sequence has been
reversed).
Fig. 4-17
The Cross type Cursor will be displayed in the V Cursor
mode and H Cursor mode.
8
With the MENU (
M
) Switch or the ITEM/AWC (
<
) Switch,
select the Vertical Address or the Horizontal Address to be
compensated.
8
In case of Cursor move, the Scratch Compensation
Cursors will be displayed on the Monitor as shown in Fig.
4-18.
Fig. 4-18
1. V: 000L O H: 000
2. V: 000L O H: 000
3. V: 000L O H: 000
4. V: 000L O H: 000
5. V: 000L O H: 000
6. V: 000L O H: 000
7. V: 000L O H: 000
8. V: 000L O H: 000
2. V: 000L O H: 000
3. V: 000L O H: 000
4. V: 000L O H: 000
5. V: 000L O H: 000
6. V: 000L O H: 000
7. V: 000L O H: 000
8. V: 000L O H: 000
Clear
Clear all Compensation Data
End
End of Compensation Mode
Horizontal Position
Odd/Even Line
Vertical Position
Number of Scratch
H Cursor
V Cursor
Scratch
Compensation
Number
Compensation
Number
V Address
H Address
V Cursor
H Cursor
Click on the first or last page to see other AW-E800E service manuals if exist.