AG-DVX100AP, AG-DVX100AN, AG-DVX100AE, AG-DVX100EN, AG-DVC180AMC - Panasonic Provideo Service Manual (repair manual). Page 101

Read Panasonic AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC Service Manual online

ELE-39 
8-5. White balance Adjustment
 
1.  Connect the oscilloscope to “MON_CB” and “MON_G” on the VFK1308P. 
2. Open the “LCD adjustment menu”
3. Select “5. White balance adjustment” in the LCD adjustment menu, and then press the “Enter” key. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4.  Adjust level difference between “a” (MON_CB) and “b” (MON_G) to become +50mV±50mV as shown in 
figure. 
Note:  
1) Signal level can be adjusted by press arrow keys on keyboard. 
2) Waveform (figure) can be displayed by press F2 key. 
3) Please measure the opposite side of waveform. MON G is reference level. 
 
5.  When adjustment is finished, press ENTER key to adjusted data write to EEPROM, then change the display 
indicated as below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6.  Connect the oscilloscope to “MON_B” and “MON_G” on the VFK1308P.
 
7.  Adjust level difference between “a” (MON_B) and “b” (MON_G) to become +300mV±50mV as shown in figure. 
Note:  
1) Signal level can be adjusted by press arrow keys on keyboard. 
2) Waveform (figure) can be displayed by press F2 key. 
3) Please measure the opposite side of waveform. MON G is reference level. 
 
8.  When adjustment is finished, press ENTER key to adjusted data write to EEPROM.
 
Page of 127
Display

Click on the first or last page to see other AG-DVX100AP / AG-DVX100AN / AG-DVX100AE / AG-DVX100EN / AG-DVC180AMC service manuals if exist.