Read Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man3) Service Manual online
INF-12
SECTION 1 SERVICE INFORMATION
(1) – Software version of each microprocessor
MM: Main microprocessor, SM: Sub microprocessor,
NT: Network microprocessor, FPGA: FPGA microprocessor
DIGITAL LINK
(2) – Input signal name
(3) – Input signal frequency (Horizontal / Vertical)
(4) – Temperature error check
(5) – Temperature at sensors (Celsius)
(3) – Input signal frequency (Horizontal / Vertical)
(4) – Temperature error check
(5) – Temperature at sensors (Celsius)
INTK (Intake air) / EXST (Exhaust air) / FLTR (Filter
clogged)
clogged)
(6) – Value of clogged sensor.
(7) – Fan rotation check
(7) – Fan rotation check
INTK (Intake fan) / LAMP (Lamp fan) / EXST (Exhaust fan)/
POWER (Power fan)
POWER (Power fan)
(8) – Iris error check (NG: error)
(9) – lamp error check (NG: error)
(10) – Lamp memory communication check (NG: error)
(11) – Projector accumulated runtime
(12) – Converted lamp runtime / Lamp on times
(9) – lamp error check (NG: error)
(10) – Lamp memory communication check (NG: error)
(11) – Projector accumulated runtime
(12) – Converted lamp runtime / Lamp on times
Current / 1 time before reset / 2 times before reset
(13) – Projector serial no.
(14) – Version no. of emulate software (when selecting other
(14) – Version no. of emulate software (when selecting other
company). [--] means not set.
(15) – Status of correction data in the memories
G-SAVED: Gamma correction data
U-SAVED: Color shading correction data
(16) – Temperature at sensors (Celsius) when the latest shut-
down occurred by temp error.
INTK (Intake air) / EXST (Exhaust air) / CLOG (Filter
clogged)
clogged)
(17) – Compensation value of filter clog
(18) – Status of lamp replacement time
(18) – Status of lamp replacement time
NG: Lamp runtime exceeds 5000H at lamp power high
(19) – Lamp runtime reset times
(20) – Actual lamp runtime
(20) – Actual lamp runtime
Current / last time reset / 2nd last time reset
8. SELF CHECK
• Displays the self diagnostic information
9. TEST PATTERN
• Displays test patterns of White/Red/Green/Blue raster signals,
- Change the patterns by up down buttons, Change the color by left right buttons.
- Change the patterns by up down buttons, Change the color by left right buttons.
10. FLICKER ADJUST
• Perform the flicker adjustment
11. MODEL NO. SETTING
• Setting up the model no. of the projector.
12. PANEL TYPE SETTING
• Setting up the LCD panel type (L-Type or R-Type).
13. INPUT AUTO CALIBRATION
• Perform the auto calibration of input signal level. (For factory inspection purpose)
14. WHITE BALANCE ADJUST
• Adjust the white balance.
15. KEYSTONE CALIBRATION
• Perform the auto keystone calibration.
16. CLOG SENSOR CALIBRATION
• Perform the calibration of clogged sensor circuit.
17. VALENS
• Displays information about Valens.
18. RGB PIXEL ADJUST (Only for PT-VZ575N)
• Adjust the convergence. Each pixel cab be moved +- 2 dots vertically and honrizontally.
19. GHOST FB CALIBRATION (Only for PT-VZ575N)
• Perform the panel ghost feedback calibration.
For Items 10 to 16, 18 and 19 of calibration and adjustment, refer to the "SECTION 3 <Adjustment>" for the procedure.
* The display information varies depending on the input signal and
version of the software.
* The word "OK" of Items (TEMP/FAN/MECHANICAL/LAMP)
would be indicated in red if the projector had shutdown due to
abnormality last time.
abnormality last time.
6(/)&+(&.
61'%
00
60
17
)3*$
',*,7$//,1.
;*$
;*$
(08/$7(6
.+=
*6$9('
2.
+=
86$9('
2.
7(03
7(03
7(03
2.
,17.
,17.
(;67
(;67
)/75
)/75&9
&/2*
&/2*
)$1
,17.,17.,17.,17./$03(;6732:(52.
0(&+$1,&$/
,5,6
,17.,17.,17.,17./$03(;6732:(52.
0(&+$1,&$/
,5,6
2.
/$03
/$03
/$03
2.
+
2.
0(025<
2.
81,7+,6725<
727$/
727$/
+
5(6(7
+
+
+
+
+
+
(1)
(13)
(15)
(14)
(16)
(17)
(19)
(18)
(20)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(12)
(9)
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man3) service manuals if exist.