Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
INF-3
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
Note
f
The remote control can be used within a distance of about 7 m (22'11-5/8") if pointed directly at the remote control signal receiver. The
remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.
f
caused by the properties of the screen.
f
the projector as far from the luminous source as possible.
Projector body
1
4 5
6
7 8
9
10
11
12
13
14
14
2
3
WARNING
Keep your hands and other objects away from the air exhaust port.
f
Keep your hand and face away.
f
f
Keep heat-sensitive articles away.
Heated air from the air exhaust port can cause burns or external damage.
1 Zoom ring (Back)
Adjust the zoom.
2 Control panel and indicators
3 Lamp cover
3 Lamp cover
The lamp unit is located inside.
4 Projection Lens
5 Focus ring (Front)
5 Focus ring (Front)
Adjust the focus.
6 Remote control signal receiver
7 Air exhaust port
7 Air exhaust port
8 Speaker
9 <AC IN> terminal
9 <AC IN> terminal
Connect the supplied power cord.
10 Connecting terminals
Air intake port(Side) / Air filter cover
11
12 Adjustable feet
Adjust the projection angle.
The air filter unit is inside
13 Air intake port (Bottom)
14 Security Chain Hook
14 Security Chain Hook
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
f
If you turn the power off with the direct power off function with the projector installed upside-down, or if you turn the projector upside-down
after turning off the power using the direct power off function, do not put your hands or objects close to the air inlet (bottom) due to the back
24 - ENGLISH
Chapter 1 Preparation - About your projector
Note
f
The remote control can be used within a distance of about 7 m (22'11-5/8") if pointed directly at the remote control signal receiver. The
remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.
f
caused by the properties of the screen.
f
the projector as far from the luminous source as possible.
Projector body
1
4 5
6
7 8
9
10
11
12
13
14
14
2
3
WARNING
Keep your hands and other objects away from the air exhaust port.
f
Keep your hand and face away.
f
f
Keep heat-sensitive articles away.
Heated air from the air exhaust port can cause burns or external damage.
1 Zoom ring (Back)
Adjust the zoom.
2 Control panel and indicators
3 Lamp cover
3 Lamp cover
The lamp unit is located inside.
4 Projection Lens
5 Focus ring (Front)
5 Focus ring (Front)
Adjust the focus.
6 Remote control signal receiver
7 Air exhaust port
7 Air exhaust port
8 Speaker
9 <AC IN> terminal
9 <AC IN> terminal
Connect the supplied power cord.
10 Connecting terminals
Air intake port(Side) / Air filter cover
11
12 Adjustable feet
Adjust the projection angle.
The air filter unit is inside
13 Air intake port (Bottom)
14 Security Chain Hook
14 Security Chain Hook
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
f
If you turn the power off with the direct power off function with the projector installed upside-down, or if you turn the projector upside-down
after turning off the power using the direct power off function, do not put your hands or objects close to the air inlet (bottom) due to the back
24 - ENGLISH
Chapter 1 Preparation - About your projector
1. 2. Projector body
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.