Read Panasonic PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) Service Manual online
INF-2
SECTION 1 SERVICE INFORMATION
<VW360/VX430/VX431K>
1. The name of each part
1. 1. Remote controls
About your projector
Remote control
1
2
3
4
5
6
7
8
9
9
10
14
13
12
15
16
17
18
17
18
11
Attention
f
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
g
Do not use a new battery together with an old battery.
g
g
Make sure the polarities (+ and -) are correct when inserting the batteries.
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
1 Power <v/b> button (v Standby / b Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Input selection buttons (<COMPUTER 1> / <COMPUTER 2>/
<HDMI 1/2> / <VIDEO> / <MEMORY VIEWER/USB DISPLAY/
NETWORK>)
Switches the input signal to project.
3 <MENU> button / <RETURN> button / asqw buttons /
<ENTER> button
Used to navigate through the menu screen.
The asqw buttons are also used to enter password or
characters for [SECURITY].
4 <FREEZE> button
Pauses the projected image and mute the audio temporarily.
5 Number (<1> - <6>) buttons
Used for entering the ID number in a multiple projector
environment or a password.
6 Remote control signal transmitter
7 <AUTO SETUP> button
7 <AUTO SETUP> button
Used to
perform automatic adjustment while projecting the
image.
8 <MUTE> button
Used to mute the audio.
9 <AV MUTE> button
Used to turn off the audio and video temporarily.
10 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a bright
surroundings.
11 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
12 <ID SET> button
Sets the projector ID on the remote control for a system using
multiple projectors.
13 <D.ZOOM+> button / <D.ZOOM-> button
Zooms in and out the images.
14 <VOL+> button / <VOL-> button
Adjusts the volume level of the built-in speaker or the audio
output.
15 <FUNCTION> button
Specifys a shortcut button for a frequently used operation.
16 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control when using multiple projectors.
17 <P-TIMER> button
Operate the P-TIMER function.
18 <SCREEN ADJ> button
Corrects the distortion of the projected image.
Caution label at the back of the remote control
of Operating Instruction.
ENGLISH - 23
Chapter 1 Preparation - About your projector
Click on the first or last page to see other PT-VW360 / PT-VX430 / PT-VX431K (serv.man3) service manuals if exist.