Read Panasonic PT-VW355N / PT-VW355ND / T-VW355NT / PT-VX425N / PT-VX425ND / PT-VX425NT (serv.man2) Service Manual online
11
PREFACE
Wireless
LAN
LAN
Specification
standards
standards
MIRRORING
mode
mode
IEEE802.11b/g/n : 2.412 GHz - 2.462 GHz
M-DIRECT
mode
mode
IEEE802.11b/g/n : 2.412 GHz - 2.472 GHz
USER mode
IEEE802.11b/g/n : 2.412 GHz - 2.472 GHz
5.180 GHz - 5.320 GHz
Modulation
DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM, MIMO
Transmission
speed
speed
IEEE802.11b : Up to 11 Mbps
IEEE802.11g/a : Up to 54 Mbps
IEEE802.11n : Up to 300 Mbps
IEEE802.11g/a : Up to 54 Mbps
IEEE802.11n : Up to 300 Mbps
Wireless channel
MIRRORING
mode
mode
IEEE802.11b/g/n: 1~11 channel
M-DIRECT
mode
mode
IEEE802.11b/g/n: 1~13 channel
USER mode
IEEE802.11b/g/n: 1~13 channel (Passive scanning)
IEEE802.11a/n: 36 / 40 / 44 / 48 / 52 / 56 / 60 / 64 channel (Passive
scanning)
scanning)
Communication
distance
distance
Approx. 30 m (98’5”) (depends on the usage environment)
Security
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),
WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (128 bit/64 bit),
WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC], EAP-FAST [MS-CHAPv2/GTC],
EAP-TTLS [MD5/MS-CHAPv2])
*1
When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO], the network
function (both wireless LAN and wired LAN) cannot be used in standby mode.
*2
When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], only the
Wake on LAN function can be used in standby mode via wired LAN. When the [PROJECTOR SETUP] menu → [ECO
MANAGEMENT] → [STANDBY MODE] is set to [NETWORK], the power consumption is normally within 6 W in standby
status. If the input source was switched to [MEMORY VIEWER] or [Panasonic APPLICATION] before the projector turns
into standby, the power consumption in standby status may be more than 6 W.
status. If the input source was switched to [MEMORY VIEWER] or [Panasonic APPLICATION] before the projector turns
into standby, the power consumption in standby status may be more than 6 W.
*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4 For details of video signals that can be projected using this projector, refer to “List of compatible signals”. (x page 135)
*5 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*6 This is an average value. It may differ depending on individual product.
*7
*6 This is an average value. It may differ depending on individual product.
*7
[LAMP POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C to 40 °C.
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
ENGLISH
- 141
Chapter 7 Appendix - Specifications
Click on the first or last page to see other PT-VW355N / PT-VW355ND / T-VW355NT / PT-VX425N / PT-VX425ND / PT-VX425NT (serv.man2) service manuals if exist.