Read Panasonic PT-VW350 / PT-VW350D / PT-VW350T / PT-VX420 / PT-VX420D / PT-VX420T / PT-VX421 (serv.man4) Service Manual online
ADJ-16
SECTION 3 ADJUSTMENTS
1. 5. Serial no. setting
1. 5. 1. Required equipment
1. PC : Use for serial no. setting
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : SST Lite.exe software (Serial no. setting software)
(Download from the projector service homepage.)
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : SST Lite.exe software (Serial no. setting software)
(Download from the projector service homepage.)
1. 5. 2. Preparation
1. Move the folder "Serial No. Setting Tool" to your favorite directly on your Computer. There are files in the Serial No. Setting
Tool folder as shown below .
- SST Lite.exe
Serial no. setting software
- LastData.txt
Setting file
- SerialNoSetting.pdf
Instruction Manual (English)
- SerialNoSettingJ.pdf
Instruction Manual (Japanese)
2. Take a memo of Baudrate, Parity and Serial No. set in
the projector.
3. Connect the serial terminal of projector and PC with an
RS-232C cable.
[Note] Setup the projector not to enter the standby mode
or shutdown mode during the working.
Communication cable (straight)
D-Sub 9p (Male)
D-Sub 9p (Female)
Projector Connection terminals
Computer
1. 5. 3. Setting procedure
1. Starting Software
Double click the icon of software [SST Lite.exe] in the folder of "Serial No. Setting Tool". The software starts and the Serial
Double click the icon of software [SST Lite.exe] in the folder of "Serial No. Setting Tool". The software starts and the Serial
No. Setting window appears.
Serial no. writing area
Serial no. checking area
Column Description
Memo
Enter description of the command
Send
Input the command to send
Receive
Indicates the response from the projector
2. Start Communication with the projector
Click [Connect] button to start communication with the projector. If the communica-
Click [Connect] button to start communication with the projector. If the communica-
tion error occurs, click [Setting] button to display the communication setting window
and check proper settings are selected. If the setting is correct, click [OK] button with
changing the another port number.
and check proper settings are selected. If the setting is correct, click [OK] button with
changing the another port number.
BAUD RATE
9600
DATA BIT 8
STOP BIT 1
PARITY BIT
STOP BIT 1
PARITY BIT
NON
Communication setting window
Communication condition of the projector
Click on the first or last page to see other PT-VW350 / PT-VW350D / PT-VW350T / PT-VX420 / PT-VX420D / PT-VX420T / PT-VX421 (serv.man4) service manuals if exist.