Read Panasonic PT-VW345NZ / PT-VW345NZD / PT-VX415NZ / PT-VX415NZD Service Manual online
SECTION 1 SERVICE INFORMATION
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
Some items can be adjusted even if signals are not input.
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
For menu items, refer to “Main menu” (
page 55) and “Sub menu” (
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
<DEFAULT> button on the remote control.
You cannot reset all the settings to the factory default at a time.
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP]
menu → [INITIALIZE ALL] (
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
ENGLISH - 55
Chapter 4 Settings - Menu Navigation
Click on the first or last page to see other PT-VW345NZ / PT-VW345NZD / PT-VX415NZ / PT-VX415NZD service manuals if exist.