Read Panasonic PT-RZ670 / PT-RW630 (serv.man5) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
< RZ670/RW630 >
11. LIGHT SELECT
・
Select the LD to be turned on from the two blocks LD according to the use conditions or purposes.
Switch by pressing the Enter button after selected.
Switch by pressing the Enter button after selected.
- ALL: Two LD blocks will light. (Default setting)
- LD1: LD1 block will light.
- LD2: LD2 block will light.
- LD1: LD1 block will light.
- LD2: LD2 block will light.
* To return ALL When turn off the power.
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
・
Press the ENTER button at "PICTURE MODE", the [Ye MODULATE] items is added.
- ON: Enable the yellow correction function.
- OFF: Disable the yellow correction function.
- OFF: Disable the yellow correction function.
・
When selected [USER] of sub menu [DYNAMIC CONTRAST], [AI WINDOW] will be added in the adjusting desired
correction amount items.
correction amount items.
- Setting the [AUTO] or [MANUAL] of APL detection area. ([MANUAL] is possible a detailed setting.)
2. [POSITION] menu
・
[DVI EQUALIZER] is added to a sub menu.
- When noise contamination to DVI input caused by long cable or external device, set this item so that the
noise decreases. (AUTO/LOW/MID/HIGH)
Please set to [AUTO] usually.
Please set to [AUTO] usually.
3. [PROJECTOR SETUP] menu
・ 「DETAILED INFORMATION」is added to [BRIGHTNESS CONTROL STATUS] of sub menu [BRIGHTNESS CONTROL].
- Detailed information of BRIGHTNESS CONTROL can be confirmed.
・
[EMULATE] is added to sub menu [RS232C], and following other company model items are added.
- MODE_HI
- MODE_NE
- MODE_EP
- MODE_SA
- MODE_SH
- MODE_MI
- MODE_SO
- MODE_CH
- OTHER
・
The following items or page are added to the sub menu [STATUS].
1) Page 2 (Add Items)
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 3 (Add Items)
- DIGITAL LINK VERSION
DIGITAL LINK microprocessor software version
- FPGA VERSION
FPGA software version (FPGA1/FPGA2)
- DDP VERSION
Formatter microprocessor software version
- LD DRIVER VERSION
LD driver main software version (LD1/LD2)
- LD SUB VERSION
LD driver sub software version
- EMULATE
Emulate setting state
- VERSION
Emulate version
3) Page 5 (Add Page)
- MAIN VER.
Main microprocessor software version
- FPGA VER.
FPGA software version (FPGA1/FPGA2)
- BMP VER.
Bitmap data version
- ENG VER. ~CC VER.
Version of the each font data
(English/Russian/Korean/Chinese/Japanese/Closed caption)
(English/Russian/Korean/Chinese/Japanese/Closed caption)
4) Page 6 (Add Page)
- TEMP(℃)
Intake air temperature (IN) / Optical module temperature (OPT) /
Exhaust air temperature (OUT) / LD1 temperature (LD1) /
LD2 temperature (LD2)
Exhaust air temperature (OUT) / LD1 temperature (LD1) /
LD2 temperature (LD2)
- FAN MODE
FAN control mode (TYPE A~TYPE J)
- atm
Atmosphere sensor [hPa]
INF - 11
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man5) service manuals if exist.