Read Panasonic PT-RZ370U / PT-RZ370E / PT-RZ370EA / PT-RW330U / PT-RW330E / PT-RW330EA (serv.man5) Service Manual online
INF - 6
2. SELF CHECK
・
Each self check item is displayed.
SELF CHECK
MAIN : 1.00.00 SUB : 1.00.00
Main, Sub microprocessor software version
NETWORK : 1.00.00 FPGA : 0x2A
Network and FPGA software version
BALLAST : 230 DIGITAL LINK : 1.30.33.1
BALLAST and DIGITAL LINK software version
EMULATE : DEFAULT
Setting and Version of EMULATE
OK
INTR. 026/224
Internal air temperature check (Celsius/Fahrenheit)
OK
INTK. 041/151
Intake air temperature check (Celsius/Fahrenheit)
OK
DMD. 054/104
DMD temperature check (Celsius/Fahrenheit)
OK
TEMP_R 036/101
LED-R temperature check (Celsius/Fahrenheit)
OK
TEMP_G 036/101
LD unit temperature check (Celsius/Fahrenheit)
OK
TEMP-B 036/101
LED-B temperature check (Celsius/Fahrenheit)
OK
WIND. 075/054/+5
Airflow sensor check (Sensor, AD conversion, Correction value)
OK
LIGHT 200h30m / 1 ON
Light source check (lighting accumulative time, number of times
OK
FAN 1111 11
the replacement, ON-OFF)
OK
PHOSPHOR WHEEL
Fan check (1:Normal/0: Abnormal)
From the left, LD-G, LED-R, LED-B, DMD, EXHAUST, DRIVER
Phosphor wheel check
From the left, LD-G, LED-R, LED-B, DMD, EXHAUST, DRIVER
Phosphor wheel check
3. MODEL
・
Set this when the A-P.C.Board is replaced.
* If you can copy EEPROM data from the old A-P.C.Board, this setting is unnecessary.
* This model setting is changed after power restart.
* This model setting is changed after power restart.
4. CLOG SENSOR CALIBRATION
・
Calibrate the clogging sensor circuit.
Execute this after EEPROM（IC1405）/A-P.C.Board or Airflow sensor (M3-P.C.Board） is replaced.
* Refer to the "SECTION3 (ADJUSTMENT PROCEDURE)" about method.
5. DVI SELECT COMMAND
・
Setting for DVI-I input terminal
DVI : Functions as a terminal for DVI input.
(When this item is selected, this terminal can be selected to Digital or Analog with DISPLAY OPTION menu.)
COMPUTER2 : Functions as a terminal for COMPUTER2 input. (Analog mode only.)
3. 3. 2. Additional function of each menu
1. "POSITION" menu
The following one item is added.
・
・
DVI EQUALIZER
When noise contamination to DVI input caused by long cable or external device, set this item so that the
noise decreases.
noise decreases.
2. "ADVANCED" menu.
The following one items are added.
・
・
FRAME LOCK
Set this item when moving picture is disturbed with RGB input.
3. "DISPLAY OPTION" menu
The following one items are added.
・CUT OFF
・CUT OFF
Red(R), Green(G), Blue(B) color component is selected and display or non-display set.
* If any error occurs, font of "OK" becomes red.
Click on the first or last page to see other PT-RZ370U / PT-RZ370E / PT-RZ370EA / PT-RW330U / PT-RW330E / PT-RW330EA (serv.man5) service manuals if exist.