Read Panasonic PT-RZ21KE / PT-RS20K Service Manual online
ADJ-19
SECTION 3 ADJUSTMENTS
< RZ21K / RS20K >
1.12. Lens calibration
1. Select sub menu [LENS] of [PROJECTOR SETUP] menu.
2. Select [LENS CALIBRATION] item.
When stepping motor zoom lens is installed, the calibration menu will be displayed, so select the [SHIFT/FOCUS] item.
3. A confirmation message is displayed and select [OK].
4. The lens will move vertically/horizontally and backward/frontward to detect the limit value of the lens shift and focus, and
setup the home position automatically.
5. After finishing the calibration, the main menu will be displayed.
PROJECTOR SETUP
PROJECTOR ID
PROJECTION METHOD
PROJECTION METHOD
AUTO
ALL
1/3
AUTO
NORMAL
100.0%
100.0%
AUTO
NORMAL
DISABLE
LAST MEMORY
DISABLE
COOLING CONDITION
HIGH ALTITUDE MODE
HIGH ALTITUDE MODE
LENS
OPERATION SETTING
LIGHT OUTPUT
BRIGHTNESS CONTROL
LIGHT OUTPUT
BRIGHTNESS CONTROL
NO SIGNAL SHUT-OFF
STANDBY MODE
NO SIGNAL LIGHTS-OUT
INITIAL STARTUP
INITIAL STARTUP
MENU SELECT
SUB MENU
ENTER
LENS
LENS TYPE
LENS MEMORY
LENS MEMORY
ET-D75LE20
LENS HOME POSITION
ACTIVE FOCUS OPTIMIZER
ACTIVE FOCUS OPTIMIZER
LENS CALIBRATION
MENU SELECT
SUB MENU
ENTER
LENS CALIBRATION:ET-D75LE20
SHIFT/FOCUS/ZOOM
SHIFT/FOCUS
ZOOM
MENU SELECT
EXECUTE
ENTER
21 - +
ZOOM BACKLASH CORRECTION
a
LENS CALIBRATION:ET-D75LE20
OK
CANCEL
CHANGE
EXECUTE
ENTER
Proceed LENS CALIBRATION,
and return to HOME POSITION.
and return to HOME POSITION.
LENS CALIBRATION:ET-D75LE20
OK
CANCEL
CHANGE
EXECUTE
ENTER
Proceed LENS SHIFT/FOCUS CALIBRATION,
and return to HOME POSITION.
and return to HOME POSITION.
・ DC
motor zoom lens
・
Stepping motor zoom lens
• [LENS CALIBRATION] cannot be executed when the [LENS TYPE] is set to [NOT SELECTED].
• [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during
calibration.
• [INCOMPLETE] is displayed when the lens calibration is not performed correctly.
Click on the first or last page to see other PT-RZ21KE / PT-RS20K service manuals if exist.