Read Panasonic PT-RZ120 (serv.man2) Service Manual online
INF-11
SECTION 1 SERVICE INFORMATION
< RZ120 >
1. DYNAMIC GAMMA MODE
• Setting of the DYNAMIC GAMMA operation.
- ON : Enable the Dynamic gamma function. (Default setting)
- OFF : Disable the Dynamic gamma function.
2. DCMS
• Setting of the 3D Color Management System operation.
- ON : Enable the 3D Color Management system function. (Default setting)
- OFF : Disable the 3D Color Management system function.
3. SELF CHECK
• Self-diagnosing information Displays.
%*#0)'
q
w
5'.(%*'%-
/1&'.264<
5'4+#.01#$
8'45+10
/#+0
57$
(2)#
(/'#
&+)+6#..+0-E
.&
219'4
'/7.#6'&'(#7.6
&'8+%'%*'%-1-
%*#0)'
q
w
5'.(%*'%-
&'8+%'%*'%-
1-#+46'/2
1-&/&6'/2
1-1766'/2
1-.&6'/2
1-.&6'/2
1-.&
1-.&
1-(#0
1-2*161
1-#6/
&'8+%'%*'%-1-
1-#0).'*
8
① --- Model number
② --- Serial number
------------ Firmware version ------------
③ --- Main microprocessor
④ --- Sub microprocessor
⑤ --- FPGA (FPGA1/FPGA2)
⑥ --- Formatter
⑦ --- Digital Link
⑧ --- LD driver (LD1/LD2)
⑨ --- Power
⑩ --- Emulate setting status
② --- Serial number
------------ Firmware version ------------
③ --- Main microprocessor
④ --- Sub microprocessor
⑤ --- FPGA (FPGA1/FPGA2)
⑥ --- Formatter
⑦ --- Digital Link
⑧ --- LD driver (LD1/LD2)
⑨ --- Power
⑩ --- Emulate setting status
------------ DEVICE CHECK ------------
⑪ --- Intake air temperature check (Celsius/Fahrenheit)
⑫ --- DMD temperature check (Celsius/Fahrenheit)
⑬ --- Exhaust air temperature check (Celsius/Fahrenheit)
⑭ --- LD1 temperature check (Celsius)
⑮ --- LD2 temperature check (Celsius)
⑯ --- LD1 check (1: normal / 0: abnormal)
⑰ --- LD2 check (1: normal / 0: abnormal)
⑱ --- Fan check (1: normal / 0: abnormal)
⑲ --- Luminance sensor check (detected value)
⑳ --- Atmospheric pressure sensor check (hPa/Celsius)
㉑ --- Angle sensor check (Horizontal angle / Vertical angle)
⑪ --- Intake air temperature check (Celsius/Fahrenheit)
⑫ --- DMD temperature check (Celsius/Fahrenheit)
⑬ --- Exhaust air temperature check (Celsius/Fahrenheit)
⑭ --- LD1 temperature check (Celsius)
⑮ --- LD2 temperature check (Celsius)
⑯ --- LD1 check (1: normal / 0: abnormal)
⑰ --- LD2 check (1: normal / 0: abnormal)
⑱ --- Fan check (1: normal / 0: abnormal)
⑲ --- Luminance sensor check (detected value)
⑳ --- Atmospheric pressure sensor check (hPa/Celsius)
㉑ --- Angle sensor check (Horizontal angle / Vertical angle)
Click on the first or last page to see other PT-RZ120 (serv.man2) service manuals if exist.