Read Panasonic PT-RQ13K (serv.man2) Service Manual online
ADJ-16
SECTION 3 ADJUSTMENTS
< RQ13K >
3. Select the connection method, and enter the setting information of the projector.
Serial terminal connection
• Select [SERIAL] menu and set up the Serial Port, Baudrate and Parity of the PC.
LAN terminal connection
• Select [LAN] menu and set up the IP address, Username, Password and Command Port of the projector.
[Note] • If the Username and Password has been changed, please select serial terminal connection.
4. After completing the connection setup, click the [Connection Check] button.
• When "Check : OK" is displayed, click the [OK] button and proceed to the next step.
• If "Check : NG" is displayed, check the setting in step 3.
Items
Default
SERIAL
Port
–
Baud Rate
9600bps
Parity
None
LAN
IP Address
192.168.0.8
Username
admin1
Password
panasonic
Command Port
1024
Click on the first or last page to see other PT-RQ13K (serv.man2) service manuals if exist.