Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
DIS-22
SECTION 2 DISASSEMBLY PROCEDURES
< RCQ10 / RCQ80 >
2. Unscrew 3 screws-A and remove the Exhaust fan block.
3. Unscrew 4 screws-B and remove the Liquid cooling pump 2.
(Torque:75±15 Ntcm)
(Torque:75±15 Ntcm)
4. Unscrew 4 screws-C and remove the Heat receiving plate 2, and then remove the Liquid cooling unit 2 (upper side).
[ Caution for re-assembling ]
t Apply the heat dissipation compound evenly to
the rear surface of liquid cooling pump and heat
receiving plate.
t Take care that compound does not stick out.
5. Remove Liquid cooling unit 1 (lower) by the same process of Liquid cooling unit 2.
A
B
B
B
B
Liquid cooling pump 2
(Upper side)
(Upper side)
B
C
C
C
C
C
C
Heat receiving plate 2
(Upper side)
(Upper side)
Exhaust fan block
A
AA
Heat dissipation compound :
Shin-Etsu Silicone [ G-787 ] grade
Apply heat dissipation compound
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.