Read Panasonic PT-P1SDU / PT-P1SDE / PT-P1SDEA Service Manual online
6.2. Removal of Upper Case
1. Turn the projector upside down.
2. Unscrew the 6 screws.
3. Return the projector to the normal position.
4. Lift the upper case upward (approx. 10 cm).
5. Disconnect the flexible cable from SD operation buttons
(connector A1 on A-P.C.Board) and remove the upper
case.
case.
Note:
·
When reassembling, be careful not to mistake the
direction of the flexible cable. (The black surface is
upper.)
direction of the flexible cable. (The black surface is
upper.)
6.3. Removal of A-P.C.Board
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the light shield metal.
3. Unscrew the 1 screw and remove the grounding metal 2.
4. Unscrew the 2 screws, then lift the A-P.C.Board and
remove it.
Note:
·
A-P.C.Board is connected with J-P.C.Board with the
connector. Work carefully when removing it.
connector. Work carefully when removing it.
6.4. Removal of J-P.C.Board
1. Remove the upper case according to the section 6.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the light shield metal.
3. Unscrew the 1 screw and remove the grounding metal 2.
4. Unscrew the 2 screws and remove the A-P.C.Board block
(with J-P.C.Board).
5. Unscrew the 2 screws and remove the A-P.C.Board.
Note:
·
A-P.C.Board is connected with J-P.C.Board with the
connector. Work carefully when removing it.
connector. Work carefully when removing it.
11
PT-P1SDU / PT-P1SDE / PT-P1SDEA
Click on the first or last page to see other PT-P1SDU / PT-P1SDE / PT-P1SDEA service manuals if exist.