Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online
DIS-31
SECTION 2 DISASSEMBLY PROCEDURE
<MZ16K/MZ13K/MZ10K>
3.1. Prism cover removal
1. Loosen 1 torx screw-A with a Torx driver (T10) and take the Prism cover off.
A
3.2. Optical block removal
1. Disconnect the FPC cable from the Optical block on the A-PCB.
2. Loosen 4 hex screws-A with a Ball point driver (2.0) and take the Optical block upward off.
A
Prism cover
Ball point driver
Optical block
Pay attention not to scratch on the surface of polar-
izer (In) when removing the Optical block.
A
A
Torque : 1.5 ~ 2.1 kgf.cm
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.