Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online
ADJ-11
SECTION 3 ADJUSTMENTS
<MZ16K/MZ13K/MZ10K>
DATE AND TIME
TIME ZONE
ADJUST CLOCK
+09:00
2019/10/25
18:18:24
LOCAL DATE
LOCAL TIME
LOCAL TIME
MENU SELECT
CHANGE
EXTRA OPTION
1/2
DYNAMIC GAMMA MODE
3DCMS
3DCMS
SHUTTER KEEP
ON
ON
ON
OFF
L
PT-MZ16K
SELF CHECK
FLICKER ADJUST
POWER OFF MESSAGE
ERROR OSD
MODEL
FLICKER ADJUST
POWER OFF MESSAGE
ERROR OSD
MODEL
LIGHT RUNTIME RESET
PANEL TYPE SETTING
RGB PIXEL ADJUST
GHOST FB CALIBRATION
CLOG SENSOR CALIBRATION
RGB PIXEL ADJUST
GHOST FB CALIBRATION
CLOG SENSOR CALIBRATION
MENU SELECT
CHANGE
LD unit
(TOP)
LD unit
(FRONT)*
LD unit
(BOTTOM)
MODEL
LD unit
TOP
FRONT
BOTTOM
PT-MZ16K
LD1-1
LD1-2
LD2-1
PT-MZ13K
LD1-1
LD2-1
LD1-2
PT-MZ10K
LD1-1
-
LD2-1
1.10. LD unit runtime reset
• After replaceing the LD unit with new one, the runtime of LD unit should
be reset with the service menu.
1. Enter the service mode (EXTRA OPTION) and select [LIGHT RUNTIME
RESET] and press [ENTER] button.
2. Select LD unit no. to reset and press [ENTER] button
- LD unit placement
Take care that the LD unit placement and type differ dependong on the models.
* Model PT-MZ10K does not provide the LD unit (FRONT).
3. The conformation window will appear. Select [OK] and press [OK] button. The runtime of the LD unit will be reset.
4. Please check that the runtime has been reset and proper lighting condition will be indicated on the [STATUS] menu
1.11. Date and time setup
1. Select THE SUB MENU [DATE AND TIME] of [PROJECTOR SETUP]
menu.
2. Set the time zone, date, and time of the built-in clock of the projector.
• For further instructions, refer to the operating instructions.
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.