PT-LB50NTU, PT-LB50NTE, PT-LB50NTEA, PT-LB50U, PT-LB50E, PT-LB50EA, PT-LB50SU, PT-LB50SE, PT-LB50SEA - Panasonic Projector Service Manual (repair manual). Page 6

Read Panasonic PT-LB50NTU / PT-LB50NTE / PT-LB50NTEA / PT-LB50U / PT-LB50E / PT-LB50EA / PT-LB50SU / PT-LB50SE / PT-LB50SEA Service Manual online

2 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
     ·    
There are SELF CHECK and SERVICE MODE for service, etc.
2.1. Procedure to enter EXT OPTION
 1. Press "MENU" button on the main unit or remote control unit to display "MENU" screen, then select "OPTION" and press
"ENTER" button.
 2. Select "INPUT GUIDE" on "OPTION" menu and press "ENTER" button 3 seconds or longer.
MENU
OPTION
INPUT GUIDE
2.2. EXT OPTION Menu and Functions
     ·    
FREEZE MSG
Switching ON/OFF "FREEZE" on-screen display
     ·    
ANGLE RESET
Switching ON/OFF "Realtime Keystone" reference level setting
Note:
     − 
− 
− 
− 
Normally, do not select. (Angle reset data will be rewritten.)
     ·    
FAN FULL MODE
Setting the cooling fan motor rotation speed
     − 
− 
− 
− 
Switching ON "FAN FULL MODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULL MODE" is ON, changing "HIGHLAND" in OPTION becomes impossible (setting "FAN FULL MODE" is given priority
more than "HIGHLAND").
     ·    
AUTOSETUP
Setting AUTO SETUP mode
     − 
− 
− 
− 
STANDARD: To set the normal mode (the dot clock is adjusted strictly))
     − 
− 
− 
− 
SPECIAL: To set the special mode (the dot clock is adjusted roughly)
Note:
     − 
− 
− 
− 
Do not change the initial setting (STANDARD).
     ·    
SYNC
Setting SYNC processing mode
     − 
− 
− 
− 
STANDARD: To set the normal mode
     − 
− 
− 
− 
SPECIAL: To set the special mode (noise reduction mode)
Note:
     − 
− 
− 
− 
Do not change the setting when it is possible to receive normally.
Change the setting only when the image is not displayed normally because of the sync signal noise of connected
equipment.
     ·    
VGA60/480p
     − 
− 
− 
− 
AUTO: Switching RGB of VGA60 and 480p automatically
6
PT-LB50NTU / PT-LB50NTE / PT-LB50NTEA / PT-LB50U / PT-LB50E / PT-LB50EA / PT-LB50SU / PT-LB50SE / PT-LB50SEA
Page of 76
Display

Click on the first or last page to see other PT-LB50NTU / PT-LB50NTE / PT-LB50NTEA / PT-LB50U / PT-LB50E / PT-LB50EA / PT-LB50SU / PT-LB50SE / PT-LB50SEA service manuals if exist.