Read Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual online
INF-4
SECTION 1 SERVICE INFORMATION
< JX200 >
ON(G)/
STANDBY(R)
LIGHT
TEMP
SD
1
2
3
4
1 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
(x page 46)
2 Light source indicator <LIGHT>
Indicates the status of the light source.
(x page 135)
3 Temperature indicator <TEMP>
Indicates the internal temperature status.
(x page 135)
4 SD card indicator <SD>
Blinks in green when accessing the SD card.
2
1
3 4
1 <DC OUT> terminal
This is the USB terminal only used for power supply. (DC 5 V,
Maximum 2 A)
2 <LAN> terminal
This is the terminal to connect to the network.
(x page 43)
3 <HDMI IN> terminal
This is the terminal to input HDMI signal.
(x page 43)
4 SD card slot
Supports SD memory card and SDHC memory card.
Attention
f
The LAN cable connecting to the projector directly should be wired indoors only.
f
Store small parts such as SD card in an appropriate manner, and keep them away from small children.
Note
f
The product number, serial number, and rating of the projector is indicated in the product plate in the position as shown in the following
illustration.
Product plate
f
Indicators
f
Connecting terminals and <DC OUT> terminal
Click on the first or last page to see other PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) service manuals if exist.