Read Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual online
INF-2
SECTION 1 SERVICE INFORMATION
< JX200 >
1. The name of each part
1. 1. Remote control
1
12
13
14
14
15
17
16
3
2
2
4
5
6
9
8
7
10
11
1 Remote control signal transmitter
2 Power <v/b> button (v standby / b power on)
2 Power <v/b> button (v standby / b power on)
Turns on/off the power of the projector.
(x pag e 46)
3 <MIRRORING> button
Switches the input to MIRRORING.
(x page 52)
4 <SIGNAGE> button
Switches the input to signage.
(x page 52)
5 <MEMORY VIEWER> button
Switches the input to Memory Viewer.
(x page 52)
6 asqw buttons/<ENTER> button/<RETURN> button
Used to operate the menu screen. Also used when entering
[SECURITY PASSWORD].
7 <AV MUTE> button
Used to turn off the image and audio temporarily.
(x pa e 57)
8 <DEFAULT> button
Resets the settings of the sub-menu to the factory defaults.
9 <MENU> button
Displays the main menu.
(x page 59)
10 <ZOOM> button/<FOCUS> button
Displays the lens menu and adjusts the projection lens.
11 <VOL+>/<VOL-> buttons
Adjusts the volume of audio output.
(x pa ge 56)
12 <LIGHTING> button
Use to turning on/off the spotlight.
(x page 56)
13 <Panasonic APP> button
Switches the input to Panasonic APPLICATION.
(x page 52
14 <HDMI> button
Switches the input to HDMI.
(x page 52)
15 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
16 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment.
(x page 27)
17 Number (<1> - <6>) buttons
Used in a multiple projector environment.
Used to enter ID number or password.
Note
f
When operating the remote control by directly pointing to the remote control signal receiver at the power supply unit of the projector, operate
the remote control within a distance approximately 7 m (22'11") or shorter from the remote control signal receiver. The remote control can
control at angles of up to ±30° vertically and horizontally, but the effective control range may be reduced.
f
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
f
The signal from the remote control can be reflected off the projection surface to operate the projector. However, the operating range may be
limited from light reflection loss or the shape of the projection surface.
f
The remote control may not operate properly if the remote control signal receiver on the power supply unit of the projector is directly
receiving strong light, such as fluorescent light. Install the projector in a place distant from the light source.
Click on the first or last page to see other PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) service manuals if exist.