Read Panasonic PT-FZ570 / PT-FW530 / PT-FX500 (serv.man4) Service Manual online
INF-5
SECTION 1 SERVICE INFORMATION
<FZ570/FW530/FX500>
1. 4. Remote controls
Chapter 1 Preparation — About your projector
ENGLISH - 25
About your projector
Remote control
2
1
3
5
4
4
6
7
11
10
23
24
16
15
17
20
19
18
21
22
22
8
9
9
14
13
12
1 Power <v/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode.
Also starts projection when the power is switched off (standby
mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 <MENU> button/<RETURN> button/<ENTER> button/
asqw
buttons
Used to navigate through the menu screen.
4 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker or audio output.
5 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
6 Input selection (<COMPUTER1/2>, <DIGITAL LINK>,
<VIDEO>, <NETWORK>, <HDMI1>, <HDMI2>) buttons
Switches the input signal to project.
7 Number (<0> ~ <9>) buttons
Used for entering an ID number or a password in a multiple
projectors environment.
8 <ON SCREEN> button
Switches on (display)/off (hide) the on-screen display function.
9 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
10 <AUTO SETUP> button
Automatically adjusts the image display position while
the image is projected.
11 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
12 <TEST PATTERN> button
Displays the test pattern.
13 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment.
14 <ECO> button
Displays the setting screen relating to ECO management.
15 <SCREEN ADJ> button
You can correct various types of distortion in a projected
image.
16 <FREEZE> button
Used when pausing the image and turning off the audio.
17 <P-TIMER> button
Operates the presentation timer function.
18 <D.ZOOM -> button/<D.ZOOM +> button
Zoom in and out the images.
19 <AV MUTE> button
Used when temporarily turning off the video and the audio.
20 <MUTE> button
Used when temporarily turning off the audio.
21 <ASPECT> button
Switches the aspect ratio of the image.
22 <STATUS> button
Displays the projector information.
23 Remote control signal transmitter
24 This terminal is not used in this projector.
24 This terminal is not used in this projector.
Front
Top
Bottom
Click on the first or last page to see other PT-FZ570 / PT-FW530 / PT-FX500 (serv.man4) service manuals if exist.