Read Panasonic PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA Service Manual online
2 Service Information
2.1. About resetting of MENU LOCK password
When you want to reset the password into the default password, do the following operation.
1. While displaying "MENU LOCK PASSW ORD" screen, press "AUTO SETUP" button on the remote control or "INPUT SELECT"
button on the main unit and "
" button at the same time for 2 seconds or more.
2. Press "
" button for 2 seconds or more.
In the "MENU LOCK PASSW ORD" screen, "PASSWORD HAS BEEN INITIALIZED" is displayed.
* The default password is "AAAA".
3 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
·
There are SELF CHECK and TEST PATTERN for service, etc.
3.1. Procedure to enter EXT OPTION
1. Press "MENU" button on the main unit or remote control to display the main menu.
2. Select "DISPLAY OPTION" and press "ENTER" button.
3. Select "ON-SCREEN DISPLAY" sub-menu in "DISPLAY OPTION" menu and press "ENTER" button.
4. Select "INPUT GUIDE" in the called up item and press "ENTER" button 3 seconds or longer.
Main menu
→
DISPLAY OPTION
→
ON-SCREEN DISPLAY
→
INPUT GUIDE
3.2. EXT OPTION Menu and Functions
·
FREEZE MESSAGE
Switching ON/OFF "FREEZE" on-screen display
·
FAN FULL MODE
Setting the cooling fan motor rotation speed
−
−
−
−
Switching ON "FAN FULL MODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULL MODE" is ON, changing "HIGH ALTITUDE MODE" in PROJECTOR SETUP becomes impossible (setting "FAN FULL
MODE" is given priority more than "HIGH ALTITUDE MODE").
FULL MODE" is ON, changing "HIGH ALTITUDE MODE" in PROJECTOR SETUP becomes impossible (setting "FAN FULL
MODE" is given priority more than "HIGH ALTITUDE MODE").
·
AUTO SETUP
Setting AUTO SETUP mode
−
−
−
−
STANDARD: To set the normal mode (the dot clock is adjusted strictly))
−
−
−
−
SPECIAL: To set the special mode (the dot clock is adjusted roughly)
Note:
−
−
−
−
Do not change the initial setting (STANDARD).
·
SYNC
Setting SYNC processing mode
−
−
−
−
STANDARD: To set the normal mode
−
−
−
−
SPECIAL: To set the special mode (noise reduction mode)
6
PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA
Click on the first or last page to see other PT-FW300NTU / PT-FW300NTE / PT-FW300NTEA / PT-FW300U / PT-FW300E / PT-FW300EA / PT-F300NTU / PT-F300NTE / PT-F300NTEA / PT-F300U / PT-F300E / PT-F300EA service manuals if exist.