Read Panasonic PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man4) Service Manual online
INF-5
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
1. 4. Remote controls
Chapter 1
Preparation — About your projector
About your projector
Remote control
r Bottom
r Top
r Front
For PT-EZ590 / PT-EW650 /
PT-EX620
For PT-EW550 /
PT-EX520
2
1
3
4
6
5
5
7
18
17
19
8
9
10
12
16
15
21
20
22
23
11
14
13
13
24
25
1 Power <v
/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode.
Also starts projection when the power is switched off (standby
mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons
Adjusts the projection lens.
4 <MENU> button/<RETURN> button/<ENTER> button/
asqw buttons
Used to navigate through the menu screen.
Used to navigate through the menu screen.
5 <VOL-> button/<VOL+> button
Adjusts the volume of the built-in speaker or audio output.
6 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
7 Input selection (<RGB1/2>, <DIGITAL LINK>
*1
, <VIDEO>,
<NETWORK>, <HDMI1>, <HDMI2>) buttons
Switches the input signal to project.
Switches the input signal to project.
(*1 This button is disabled for PT-EW550 and PT-EX520.)
8 Number (<0> ~ <9>) buttons
Used for entering an ID number or a password in a multiple
projectors environment.
9 <ON SCREEN> button
Switches on
(display)/off
(hide) the on-screen display function.
10 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
11 <AUTO SETUP> button
Automatically adjusts the image display position while
the image is projected.
the image is projected.
12 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
13 <SHUTTER> button/<AV MUTE> button
(<SHUTTER> button is for PT-EZ590, PT-EW650 and
PT-EX620.
<AV MUTE> button is for PT-EW550 and PT-EX520.)
Used when temporarily turning off the image and the audio.
14 <TEST PATTERN> button
Displays the test pattern.
15 <ID SET> button
Sets the ID number of the remote control in a multiple
projector environment.
16 <ECO> button
Displays the setting screen relating to ECO management.
17 <SCREEN ADJ> button
You can correct various types of distortion in a projected image.
18 <FREEZE> button
Used when pausing the image and turning off the audio.
19 <P-TIMER> button
Operates the presentation timer function.
20 <D.ZOOM -> button/<D.ZOOM +> button
Zoom in and out the images.
21 <MUTE> button
Used when temporarily turning off the audio.
22 <ASPECT> button
Switches the aspect ratio of the image.
23 <STATUS> button
Displays the projector information.
24 Remote control signal transmitter
25 Remote control wired terminal
This is the terminal used to connect to the projector via a cable
when the remote control is used as a wired remote control.
when the remote control is used as a wired remote control.
Click on the first or last page to see other PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man4) service manuals if exist.