Read Panasonic PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man4) Service Manual online
INF-3
SECTION 1 SERVICE INFORMATION
<EZ590/EW650/EW550/EX620/EX520>
1. 2. Control panel
Chapter 1
Preparation — About your projector
ENGLISH - 27
16 Control panel
17
Air ilter cover
The air filter unit is inside.
18 Air intake port
r Bottom
22
20
18
21
19
r Top
Projection direction
19
Lens release button fixing screw hole
When you replace the projection lens, you can use if you want
to fix the lens release button.
20 Burglar hook port
Attaches a burglar prevention cable, etc.
21 Luminance sensor
Measures the brightness of the installation environment. When
the daylight view function is set to [AUTO], the vividness of the
image is automatically corrected.
image is automatically corrected.
22 Lamp cover
The lamp unit is inside.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
6
3
5
1
2
3
4
1 Power <v/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode. Also starts
projection when the power is switched off (standby mode).
2 <MENU> button/<ENTER> button/asqw buttons
Used to navigate through the menu screen.
Returns to the previous menu when a sub-menu is displayed.
Also used to enter a password in [SECURITY] or enter
characters.
characters.
3 <VOL-> button/<VOL+> button
Adjusts the volume of audio output.
4 <SHUTTER> button/<AV MUTE> button
(<SHUTTER> button is for PT-EZ590, PT-EW650 and
PT-EX620.
<AV MUTE> button is for PT-EW550 and PT-EX520.)
Used when temporarily turning off the image and audio.
5 <INPUT SELECT> button
Switches the input signal to project.
6 <LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
Chapter 1
Preparation — About your projector
ENGLISH - 27
16 Control panel
17
Air ilter cover
The air filter unit is inside.
18 Air intake port
r Bottom
22
20
18
21
19
r Top
Projection direction
19
Lens release button fixing screw hole
When you replace the projection lens, you can use if you want
to fix the lens release button.
20 Burglar hook port
Attaches a burglar prevention cable, etc.
21 Luminance sensor
Measures the brightness of the installation environment. When
the daylight view function is set to [AUTO], the vividness of the
image is automatically corrected.
image is automatically corrected.
22 Lamp cover
The lamp unit is inside.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
6
3
5
1
2
3
4
1 Power <v/b> button (v standby/b power on)
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode. Also starts
projection when the power is switched off (standby mode).
2 <MENU> button/<ENTER> button/asqw buttons
Used to navigate through the menu screen.
Returns to the previous menu when a sub-menu is displayed.
Also used to enter a password in [SECURITY] or enter
characters.
characters.
3 <VOL-> button/<VOL+> button
Adjusts the volume of audio output.
4 <SHUTTER> button/<AV MUTE> button
(<SHUTTER> button is for PT-EZ590, PT-EW650 and
PT-EX620.
<AV MUTE> button is for PT-EW550 and PT-EX520.)
Used when temporarily turning off the image and audio.
5 <INPUT SELECT> button
Switches the input signal to project.
6 <LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
Click on the first or last page to see other PT-EZ590E / PT-EZ590LE / PT-EW650E / PT-EW650LE / PT-EW550E / PT-EX620E / PT-EX620LE / PT-EX520E (serv.man4) service manuals if exist.