Read Panasonic PT-EX12KU / PT-EX12KE Service Manual online
-5-
Specifications
Model No.
PT-EX12KU/PT-EX12KE
Power supply
AC 100 V - 240 V 50 Hz/60 Hz
Power consumption
100 V - 240 V 10.3 A 940 W
Standby: 17 W
Standby: 17 W
LCD panel
Size
4.57 cm (1.8”) (aspect ratio 4:3)
Display sys-
tem
tem
Three transparent LCD panels (RGB)
Drive system Polysilicon TFT active matrix system
Number of
pixels
pixels
786 432 pixels (1 024 x 768 dots) x 3 panels
Luminous lamp
380 W NSHA UHM lamp x 2
Light output
13 000 lm
Usage conditions
Usage conditions
[lamp select] : [2-Lamps]
[Lamp power] : auto or standard
[Image select]: [Dynamic]
[Advanced color]: [Auto]
Lens Model No.: ET-ELS03
Image signals that can be pro-
jected
jected
Refer to “List of compatible signals”
Color system
Six standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM)
Screen size
1.02 m (40”) – 15.24 m (600”)
Screen aspect ratio
4:3
Projection method
Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Contrast ratio
4 000:1
Usage conditions
Usage conditions
[Lamp select]: [2-Lamps]
[Lamp power]: auto
[Image select]: [Dynamic]
[Advanced color]: [Auto]
Terminals
INPUT 1
DVI-D input
terminal
terminal
1 set, DVI-D 24 p (HDCP compliant)
Digital signal
Digital signal
TMDS (Transition Minimized Differential Signaling)
HDMI input
terminal
terminal
1 set, HDMI 19 pin (HDCP, Deep color compliant)
Computer
input terminal
input terminal
1 set (D-sub 15 p (female))
RGB signal
RGB signal
0.7 V [p-p] 75
Ω (G-SYNC: 1.0 V [p-p] 75Ω)
HD/SYNC TTL high impedance, automatic positive/neg-
ative polarity compatible
ative polarity compatible
VD, TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
INPUT 2
RGB 5BNC
input terminal
input terminal
1 set (BNC 5 p)
RGB signal
RGB signal
0.7 V [p-p] 75
Ω (G-SYNC: 1.0 V [p-p] 75Ω) HD/SYNC
TTL high impedance, automatic positive/negative polar-
ity compatible
ity compatible
VIDEO signal
1.0 V [p-p] 75
Ω negative sync
Y P
B
/C
B
P
R
/C
R
signal
Y: 1.0 V [p-p] negative sync, P
B
/C
B
: 0.7 V [p-p] 75
Ω, P
R
/
C
R
: 0.7 V [p-p] 75
Ω
S-VIDEO input
terminal
terminal
1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75
Ω S1 signal compliant
Serial input/output ter-
minal
minal
D-Sub 9 p 1 set, RS-232C-compatible computer control
USB terminal (used by
service personnel)
service personnel)
US connector (1 set, series B)
Wired remote control
terminal
terminal
Mini jack
LAN terminal
1 set, RJ-45 for network connection, PJLink compliant, 10Base-T/100Base-TX
The following table describes the specifications of the projector.
Click on the first or last page to see other PT-EX12KU / PT-EX12KE service manuals if exist.