Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man5) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
<PT-DZ16K>
Ballast input voltage ballast check
Lighting mode:CN1(Ballast 1) 1pin DC380V
PC1 Replace the PC1-P.C.Board.
B Ballast input voltage ballast check
Lighting mode:CN1(Ballast 3) 1pin DC380V
PC2 Replace the PC2-P.C.Board.
■ Lamp does not turn ON. (Self-diagnosis display: U51/U52/U53/U54)
B
B Please confirm that connection is enough.
B
Check each connector.
CN1(Ballast 1,2)-Relay connector-P11(P1)、
CN1(Ballast 3,4)-Relay connector-P11(P2)、
CN2(Ballast 1,2)-G22、
CN2(Ballast 3,4)-G16、
CN3(Ballast 1,2,3,4)-Each lamp unit
*The decline of AC voltage or instant blackout makes the lamp turned off. Confirm the situation of power supply.
* After turning off the lamp, the temperature of the lamp is high. Turn the power supply on when the temperature of the lamp is low.
B Replace each B-P.C.Board.
G
Check the following parts of around G-P.C.Board.
U51:IC6528, U52:IC6534
Replace the lamp.
Check the status of each lamp.
OK
NG
OK
NG
NG
OK
NG
OK
NG
INF - 30
■ Lamp does not turn ON. (Self-diagnosis display:U71 ~U74、F41~F44)
Check mounting of each lamp and lamp case.
p
Install the lamp and lamp case properly.
,
U53:IC6200, U54:IC6202
Check the communication line of lamp memory.
(See Block Diagram)
OK
NG
NG
INF - 30
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man5) service manuals if exist.