Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
<PT-DZ16K>
G
●
Cannot control from the front side of the main unit.
■ Remote control does not respond
When remote control is operated, the signal can be
detected at G17 connector 5pin.
G
・
R
Check the cable between connectors G17 and R1
(No breaking of wire, etc.).
Replace the R-P.C.Board.
G When remote control is operated, the signal can be
detected at 6pin of IC6012.
G
G
Check the cable between connectors G19 and BR1.
Replace the BR-P.C.Board.
Check IC6001.
Replace the G-P.C.Board.
G
Check and repair IC6012,JK6001,Q6008 and the
peripheral circuits.
G
BR
When remote control is operated, the signal can be
detected at G19 connector 7pin.
●
Cannot control from the rear side of the main unit.
NG
NG
OK
OK
NG
OK
INF - 37
G
G
Connect the cables properly.
G
When remote control is operated, the signal can be
detected at 4pin of IC6007.
Check and repair IC6007 and the peripheral circuits.
Replace the G-P.C.Board.
G When the command is transmitted, the signal can
be detected at IC6010 pin 10,12,17.
G Check and repair IC6010 and the peripheral circuits.
G
Replace the G-P.C.Board.
■ SERIAL IN/OUT does not respond
Check RS-232C cable connection. (JK6003/JK6004)
NG
OK
OK
OK
NG
NG
OK
INF - 37
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) service manuals if exist.