Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) Other Service Manuals online
SECTION 1 SERVICE INFORMATION
<PT-DZ16K>
6. 2. System log data acquisition method
* The log data acquisition via LAN terminal or serial terminal.
6. 2. 1. Equipment to be used
1. Computer : Use it for the transfer of backup data.
2. Communication cable
2. Communication cable
・
Case of serial terminal connection : D-sub 9pin (male/female RS-232C straight)
・
Case of LAN terminal connection : LAN cable. (When connecting directly, use a cross cable)
3. Service Software : ［DataLogBackup.exe］ Please download the service software from the projector service Web (PASS).
6. 2. 2. Connection Preparations
1. In the case of serial terminal connection
・
Confirm the RS-232C settings (ID, Baudrate and Parity) and take a note.
2. In the case of LAN terminal connection
・
Confirm the network IP address of the projector and take a note.
・
Set the IP address of computer to approximate value of projector IP address.
3. Connect the projector and the PC by using a communication cable.
[Note]
[Note]
Set up your computer not to standby or shutdown.
Serial terminal connection
LAN terminal connection
INF - 25
6. 2. 3. Acquisition of log data
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software ［DataLogBackup.exe］ with a computer.
2. Start up service software ［DataLogBackup.exe］ with a computer.
3. 1) Select "Option " → " Setting".
2) Select the connection method, enter the setting information of the projector.
2) Select the connection method, enter the setting information of the projector.
INF - 25
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) service manuals if exist.