ET-YFB100G - Panasonic Projector Service Manual (repair manual). Page 11

1. PC :  Use to transfer the backup data.
2. Communication cable : D-sub 9pin (male/emale  RS-232C straight)
3. Software : ［Service YFB100.exe］Adjustment software is downloaded from the projector service homepage.
* Please prepare the projector and LAN cable corresponding for DIGITAL LINK.

1. Connect the RS-232C terminal of interface box and computer, with a RS-232C cable.
2. Connect the DIGITAL LINK terminal of interface box and projector, with a LAN cable.

1. Switching on the interface box and projector. (POWER indicator is lighted in green.)
2. Select the "BOX" in the "RS232C SELECT" of "EXT OPTION" menu. 
    (Change the connection to the interface box (service mode).)
3. Start up service software ［Service YFB100.exe］ with a computer.
4. Select language and click the [ OK ] button.

5. 1) Select the Serial Port of the computer.
    2) Select a model number.
    3) Click the [ Data ] button.

When "A-P.C.Board" is replaced, adjustments are required.  Adjust each item according to the table below.

Adjustment Items

 7. 2. Model Information Setup

 7. 3. Setting the Serial Number

 7. 1. Data Transfer

Remarks

 Save data to a PC before A-P.C.B  exchange and write it into a new A-P.C.B.

③

①

②

Computer

Interface box

RS-232C cable (Streight)

LAN (CAT5e)

DIGITAL LINK compatible

projector

11