KX-MB2110RUW, KX-MB2130RUW, KX-MB2170RUW, KX-MB2117RUB, KX-MB2137RUB, KX-MB2177RUB - Panasonic Copying Equipment Service Manual (repair manual). Page 112

112

KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB

   Interface messages

• The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load

paper or remove the jammed paper. 

• If the PC fax (feature #442) is set to “ALWAYS”,

- check the connection between the computer and the unit.
- check that the computer is turned on.

• If the fax preview mode (feature #448) is set to “ON“.

- view, print or save the received fax documents using the web browser on the computer connected via
the LAN, and then erase the unnecessary documents.
- turn the setting to “OFF“. The fax documents stored in memory will be printed automatically.
Refer to Program Mode Table (P.115).

• After the unit has been in power save mode (feature #403) for up to 5 minutes, the unit will enter sleep

mode. Press any key to put the unit in standby for the next process.

• The unit may not enter sleep mode when beeping for alert or displaying an error message.

Refer to Program Mode Table (P.115).

• The toner is empty. Replace the toner cartridge immediately.

• The toner is reaching the end of its life. You will need to replace the toner cartridge soon.

• A transmission error occurred. Try again. 

DISPLAY MESSAGE

CAUSE AND REMEDY

DISPLAY MESSAGE

CAUSE AND REMEDY

• IP address of the server or network configuration is incorrect. Consult your network administrator.
• The server is down. Consult your network administrator.

• The cable between the unit and the computer is not connected correctly. Check the connections.
• IP address of the server or network configuration is incorrect. Consult your network administrator.
• Your computer may not have enough memory. Change to a lower resolution for scanning and try again.
• The email server configuration requires authentication. Check the configuration of the email server.
• SMB folder is read only. Consult your network administrator.
• Login name or password of the server is incorrect or you do not have permission to login to the server.

Consult your network administrator.

• The server name is incorrect. Consult your network administrator.
• The server is down. Consult your network administrator to activate the server.

• The cable between the unit and the computer is not connected correctly. Check the connections.
• Check that the computer is turned ON.

• The path of FTP server or SMB folder is incorrect. Consult your network administrator.

• Check that the computer is turned ON.
• The Multi-Function station’s scan application is not running correctly on the computer. Restart your com-

puter and try again.

• If your computer is busy, close other applications.
• Your firewall software is blocking the LAN connection. Disable the firewall software or change the firewall

settings to allow the unit access to your computer.

• The cable between the unit and the computer is not connected correctly. Check the connections.
• The computer has some kind of problem. (Example: Make sure that the computer is turned on.).
• The Multi-Function station’s scan application is not running correctly on the computer. Restart your com-

puter and try again.