Read Panasonic KX-CL500 / KX-CL510 Service Manual online
8 Removal and Replacement Procedures
Before performing the following steps, unplug the AC power cord, then remove the 4 toner cartridges ( cyan, magenta, yellow
and black ), waste toner cartridge and standard paper cassette from the printer.
and black ), waste toner cartridge and standard paper cassette from the printer.
Caution 1: Handling the Sub Fuser Fan
When the sub fuser fan is rotating, do not touch the fan of sub fuser fan motor or you will be wounded by the edge of
fan.
fan.
Caution 2: Don’t loosen or remove any component (nuts, screws, fasten terminals, etc.) on (from) the IH coil unit.
The big current (approx. 12Arms: 100V AC Power) flows in the IH coil, IH cable, thermostat cables and thermostats. The
nuts, screws and fasten terminals connect the IH cable to the IH coil and thermostats. For protection from fire, smoke
and other hazard, don’t loosen or remove any component on (from) the IH coil unit.
nuts, screws and fasten terminals connect the IH cable to the IH coil and thermostats. For protection from fire, smoke
and other hazard, don’t loosen or remove any component on (from) the IH coil unit.
123
KX-CL500 / KX-CL510
Click on the first or last page to see other KX-CL500 / KX-CL510 service manuals if exist.