Read Panasonic DP-MB545 / DP-MB537 / DP-MB536 Service Manual Supplement online
2
DP-MB545/ DP-MB537/ DP-MB536
1 CHANGES
1.1.
Subject
SUFFIX LOCATION
1.2.
Replacement Parts List
Suffix
Reason for suffix change
E to F
Change Touch Panel IF Board, LCD and Soft Switch Board
R to S
Change firmware for KX-MB536SX
C to D
Change firmware for KX-MB545SX
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
Operation Panel Section (DP-MB545/ DP-MB537 only)
Note: When replacing following the LCD, replace the old ROM IC (IC4) by the new one at the same time.
38
Note: When replacing following the LCD, replace the old ROM IC (IC4) by the new one at the same time.
38
L5BDDYY00176
L5DYDYY00007
LIQUID CRYSTAL DISPLAY
1
8
X
F
Touch Panel IF Board (DP-MB545/ DP-MB537 only)
Note: When replacing following the parts, replace old LCD by new LCD (above new LCD) at the same time.
PCB8
Note: When replacing following the parts, replace old LCD by new LCD (above new LCD) at the same time.
PCB8
PNLPB545JTT
PNLPB545JTT1
TOUCH PANEL IF BOARD
ASS’Y (RTL)
ASS’Y (RTL)
1
8
X
F
IC4
PNWIBB545JT
PNWIBB545JT1
IC (ROM)
1
8
X
F
Click on the first or last page to see other DP-MB545 / DP-MB537 / DP-MB536 service manuals if exist.