Read Panasonic FP-7742 / FP-7750 Service Manual online
5-4
Location
Shipping material/Procedure
Check
5
Pour the developer into the unit
(1) Remove the developer unit lid.
(2) Pour the developer evenly into the
unit.
Note:
Pour in the entire bottle of
developer, after shaking it
well.
(3) Reinstall the developer unit lid.
(4) Reinstall the developer unit.
(5) Reconnect the TDC connector.
(6) Reinstall the drum unit.
(7) Pull the developer unit release
lever out until it stops and rotate it
90 degrees counterclockwise.
(8) Push the developer unit release
lever back in until it stops.
Cleaning blade pressure release
(1) Install the cleaning blade pressure
spring to the pin.
(2) Reconnect the solenoid connector.
(3) Reinstall the solenoid cover. (1
screw)
(4) Swing back the toner bottle/
hopper.
(5) Raise the paper transport.
(6) Close the front cover.
(7) Install the waste toner bottle.
(8) Close the waste toner bottle cover.
Turn the power switch ON
Power SW
6
7
Pin
Spring
Click on the first or last page to see other FP-7742 / FP-7750 service manuals if exist.