Read Panasonic FA-S280 Service Manual online
4-2
Troubleshhooting
(2) Paper Jam
Detection of Paper Jam
• FA-S280 copy paper transport condition is monitored by the sensors shown
below. When paper is jammed, the jam position indicator ( ) blinks. at the
same time, "paper jam" is memorized by code number (J60). (Maximum 10
occurrences including options.)
• To recall paper jam codes, refer to the copier service manual "F8-06", page 4-
1(7).
(a) Jam conditions
• When the sorter paper feed sensor does not detect paper within a predetermined
time after the paper exit sensor in the copier detects paper.
• When the sorter paper exit sensor does not detect paper within a predetermined
time after the paper feed sensor in the sorter detects paper.
• When the sorter paper feed sensor and the sorter paper exit sensor detect
paper when the power switch is turned on.
To clear "paper jam" indication, remove the paper, reset the sorter mode and
select the sorter mode again.
(3) Machine malfunctions
• When the CPU P.C.B. can not control the machine or any trouble occurs, the
error code(Exx) appears in the message display of the copier and the machine
will stop.
• To clear Exx, release the sort mode and select the sort mode again.
(a) Sorter failure
Item
Communication
failure
failure
Bin motor failure
Error
code
code
E5-22
E7-01
Cause
• Communication between the copier and the sorter
is faulty.
• The reed cam switch is not re-turned ON within a
predetermined time after motor drive signal is
output.
output.
• The bin home position detecting switch is not
turned OFF within a predetermined time after the
bins are lifted up from the bin home position.
bins are lifted up from the bin home position.
Click on the first or last page to see other FA-S280 service manuals if exist.